LEDs are an indispensable line of lighting technology in today’s era, they are optimized in an almost comprehensive way and bring many useful functions to consumers.
Therefore, the need to change LED bulbs in regular fixtures is increasing, so that you and many other consumers can better understand Can you put led bulbs in regular fixtures, then in this post we will give you our in-depth understanding of this method.
Can LED bulbs in regular fixtures?
Currently, the use of LED lighting is becoming popular with households, business locations such as restaurants, hotels, shopping centers.
The reason LEDs are increasingly popular is because this is the best lighting device available today and can conveniently replace other available bulbs, but few conventional bulbs on the market have. can do that.
For any type of LED bulb, the manufacturer has instructions on how to use the lamp properly to ensure safety and increase the durability of the product.
One of the things that you must concentrate on is correctly mounting and using LED bulbs in regular fixtures because this helps improve lamp life and saves the expense of removing the new one.
Having LEDs in place indoor lighting systems, here are some simple hints that you should know about, to get the best results. The manufacturer has detailed guidelines and notes for any form of LED bulb to ensure the protection and reliability of the device. And you should pay heed to some general notes here:
- Do not bring in direct sunlight or high temperature, to prevent shortening lamp life, mount and use the lamps in the airtight spot.
- Supply enough voltage before service
- Do not mount high humidity lamps in areas.
- Securely and certainly mount the lamp, withdraw power, wait for a while before it is removed, moved, or replaced.
- Clean lamps periodically for the highest light output using clean, dry fabric and air sprayers.
- Do not use bulb washing chemicals.
- Do not mount close fire or explosion-producing devices.
LED lighting is designed and constructed by a variety of small electronic components so, once mounted, the protection and reliability of the device need to be gentle and obey the directions.
The Led’s electronic components are shielded from the outer plastic shell but they also don’t ensure the protection of joints when they are heavily impacted, when heating it is easy for such joints to be opened.
Or the light is continually flickering and making the user get an uneasy feeling which can easily cause harm to the lamp.
Furthermore, the power supply must be steady rather than flashing, cause a luminous flux, or cause a very quick burn.
When using or LED bulbs in regular fixtures, don’t leave the LED and any other light product in damp environments as the electrical current is quickly compromised when the light is on.
When left for long, there is a chance of electrical shock or fire when the user restores or removes the unit.
To make the light from Led nice, clean and sanitize the bulbs periodically, if you replace lighting equipment.
When wiping, you must use a soft towel to wipe, do not use chemicals to clean the bulb so this is quick to shorten. In this light bulb, you must use microchips and electrical components. Do not fail to clean with a dry towel; it would be dangerous to you to prevent an electric shock.
Can Halogen lamps be replaced with LED bulbs in regular fixtures?
Naturally, the answer is “YES,” and it is a huge help to the marketing campaign by the light bulb rows. And you can quickly replace all the halogen bulbs and incandescent bulbs in your LED bulbs in regular fixtures if all is right and the right voltage.
Several years back, the halogen lamp was considered the leading lighting option when LED technology was never born, several times better than inflammable bulbs.
However, it allowed the lighting industry to reach a new millennium when LEd manufacturing came into being. Since LEDs conserve 50% energy, less heat emits and lasts up to 50,000 hours compared to incandescent bulbs (2.5 times more than incandescent bulbs).
However, you can use the original lamp holes and holder for LED bulbs to conserve money if your family already has old halogen bulbs.
#1. Select The Proper LED Bulb
Check the original bulb and cable. The bulk of halogen lamps have a small pin to the energy source. Test the lower end of the new lamp to see how the connectors appear and use a ruler to check the mounting height and the cutout size for the bulb.
You have to be careful and accurate with each connection when mounting your lamp to ensure safe.
You should pay attention to prevent unstable flickering of the power supply during the installation of led lights; prevent bulb burnout and ensure that the lamp is alive.
Here we help you understand how lighting devices can be replaced by LED bulbs:
- You can find the size of the joint printed somewhere on the socket.
- If your bulb is fastened and twisted to two sides on the rim, it’s probably a GU10 bulb of 240 Volt and usually a 50mm attachment.
They can also be converted to LED bulbs and no pieces can be removed. The bulb may be an MR11 or MR16 low-pressure bulb if it has 2 point pins and press them in.
If you use these 12-volt bulbs instead of halogen bulbs, it needs a transformer.
#2. Power For Research
Since LED bulbs use less power than halogen bulbs, the same energy would not be used. But most LED bulbs register on the box their corresponding wattage.
You will measure the equivalent potential if no information is contained in the box. Also, Led bulbs use 10 percent fewer than halogen bulbs, which ensures that a 10-watt bulb represents about 100 watts of halogen.
#3. Pick ampoules from 650 to 700 lumens to fit the majority of halogen bulbs
To ensure that you get the same result from an LED lamp as you will from a halogen lumens calculate the light output of a bulb. The typical halogen bulb varies from 650-700 lumens but various lighting specifications can be met.
You would possibly require higher lumens if the light bulbs are needed to light the working room. You may choose the lower lumen if your backlight gives gentle ambient light in the showroom area.
Choose from 2700-3000K color temperature for the warm sun. When you think of LEDs, most people think of blue light, but they have a range of color temperatures. The colder is the smaller number and the hotter the higher number. Look for LED bulbs in the 2700-3000 K range if you like the warm glow of a traditional halogen bulb.
For cool lights, pick the color temperature from 4000-6000K. Look for a higher color temperature spectrum if you prefer the new, clean look of cold light. These are the colors that most people associate with LED bulbs.
If you have a dimmer switch, choose dim LED bulbs. You can select LED bulbs that operate with dimmers if you want to change the luminosity based on your daytime. Many LED bulbs are going to work with your dimmer. You will need to adjust a low-voltage variant of the dimmer in certain situations.
To replace the dimmer switch, turn off the power of the switch, then remove the switch plate and remove it. Pull the switch out of the electrical box and unplug the cord, then reattach the cord to the clutch
*** Refer to more article: Converting to LED lights: everything you need to know
Frequently asked questions
Here are some questions related to LEDs:
#2. In which areas of the house are LED bulbs used to replace commonly used lighting equipment?
They are used to replace any lighting equipment if the user wants, but the most popular is still used for living room space, bedroom, kitchen, bathroom … Because these places are all used. For living and using the main power source, LEDs are always the first solution if users want to save energy but still provide enough light for living.
#2. Do LED bulbs that replace lighting equipment contain any heavy or dangerous metals like mercury?
Mercury or other hazardous metals or chemicals should not be used in LED bulbs. CFLs and fluorescent lamps contain very small concentrations of mercury, which must be carefully controlled. You don’t need to be worried about costly or special recycling techniques when your LED bulb ceases working.
#3. Why should I replace LED bulbs with lighting equipment?
There are many reasons for you to choose LED bulbs to install for lighting equipment, including,
- Instantly lower your electricity bills.
- Less heat. LEDs convert electricity into extremely efficient light.
- LED lamp life is very long, usually 50,000 to 100,000 hours.
- They are almost indestructible.
- They do not contain mercury or other harmful materials
- Highly recyclable – without hazardous parts, most parts can be easily recalled in an environmentally safe way.
In conclusion, LED lamps that can replace other bulbs or attach to lighting devices conveniently and without difficulty when you follow the principles and meet the regulations on the power of the light bulb. Just like that, you can bring good light to your space.