Installing the bracket for the recessed ceiling fan is not difficult, but how to install the ceiling light mounting bracket properly. It will only take a little while to get the mounts done for the ceiling recessed fan. Some of the challenges you will encounter during the installation process are finding or creating a place to hang the ceiling light fan.
Conventional electrical boxes are of the kind commonly used in home construction, not designed to match the weight of most fans or the vibrations they generate. Useful info on how to install ceiling light mounting bracket.
#1. Installation Location
Recessed ceiling frames are usually installed in the center of the room to ensure that the air is cooled and circulated evenly throughout the room. You cannot install a ceiling fan that is too large in a narrow room, nor should you install just one ceiling fan in an area up to hundreds of square meters. You need to base on the area of the room you plan to install the fan to decide how many fan blades you need or how many fans will be suitable.
For example, for rooms with an area of more than 30 square meters, fans with a wingspan of about 1.52 meters should be installed and for rooms with an area of about 20-25 square meters, you should choose ceiling fans with a wingspan of about 1.52 meters. the wingspan of about 1.32 meters is suitable.
When installing, you should also note that the ceiling impeller should be at least 0.8 meters away from the wall so as not to hit the wall and ensure airflow can circulate effectively. At the same time, if you need to install multiple ceiling fans in a room, you should also calculate the distance between the fans appropriately, ensuring that the centers of the fans are at least 3 meters apart.
Usually, the position to install the recessed ceiling light frame most chosen by people in the center position of the ceiling. However, with rooms designed according to special architectural styles, it is a bit more difficult to balance the installation.
At this point, you need to depend on the width, narrow or shape of the room to outline the image before mounting and then based on that to adjust the installation position to the most reasonable.
***Follow the video below:
https://www.youtube.com/watch?v=x1FQGyE81aQ
#2. Distance Between Floor and Ceiling With Ceiling Propeller
The safe distance from the ceiling and floor to the fan blade is also one of the factors you need to pay attention to when installing a ceiling fan to ensure the fan does not hit the ceiling or people and other standing objects. on the house floor.
The most reasonable distance from the floor to the propeller should be between 2.5 – 2.7 meters and should not exceed 4 meters. Therefore, you should prioritize the selection of the right axial ceiling fan to ensure this distance or choose a fan with a variable-length axis that makes it easy to adjust to the above distance.
*** Refer to other useful articles related:
- How To Wire Ceiling Fan And Light Separately (Experts Answer!)
- How to Wire a Bathroom Fan and Light on Separate Switches
#3. Install a New Electrical Box
If accessible on the ceiling where the box is located, the simple job is to replace the existing box with a rating for the recessed ceiling lamp fan.
Remove any existing light fixture like you would replace it with a new one, and push any wires back into the attic. From the attic side, remove the box from the rafter or beam it is nailed to and replace it with a new box designed for the recessed ceiling fan. Push the cords back into the new box and connect them as they were, leaving the same wires going to a free light fixture for use with a fan.
If the box can’t be accessed through the attic, the box still needs replacing but it’s a bit more complicated. The old box still has to be removed by breaking it with a screwdriver and hammer or poking it out of the ceiling beam, leaving any wires above the ceiling.
Special box available for mounting through a hole in the ceiling; they have extendable bars that will reach the beam on either side of the hole and by rotating a nut on the bar will be pushed in and into the adjacent connecting bars. In addition, a beam can be positioned and a hole is cut directly on the beam. The second type of special power box is available that will match the beams.
In both cases, the wire is pushed into a new box. If the hole for the original lightbox was opened, it should be right next to the new box and a recessed ceiling fan medal would cover the hole purchased and installed above the fan.
“You will need a non-contact voltage detector”
There are some tools that are more valuable to an electrician tirelessly dealing with his or her dealings than a “tick tester” or non-contact voltage detector. As a professional electrician, I always have one in my pocket when I go to work.
Easy to use and relatively inexpensive, they are an indispensable safety tool for anyone doing electrical work. Please consider buying one
#4. Safety Factor
The safety factor is the most important factor when mounting a bracket for a recessed ceiling fan, you should note the following points:
Make sure that the connection between the lamp fan and the ceiling surface retains the necessary stability to prevent the fan from falling or making noise. The ceiling light fan also needs to be installed with the correct specifications and standards to be able to operate smoothly without any problems.
With electrical system: The common ceiling lights often use civil electricity, with small consumption. If the fan has a large capacity, it is recommended to get the power source directly from the mainboard to avoid overload. You should design awaiting power line for the fan line and consult a skilled electrician to design, to help ensure safety and aesthetics.
With fan hook: If when designing and building your house, you have to hook the fan, the installation of a ceiling fan is very easy. But for rooms without a hook, it is necessary to fabricate the fake hook with a screw or hook. To ensure safety when using the fan, you need to have a skilled technician to construct this part, do not manually attach non-standard hooks or screws.
In addition, after installing and putting it into use, you should also pay attention to periodically check the condition of the ceiling fan such as whether the screws are still tightened or not, parts such as motor shaft, seat belts are guaranteed. protection… and should regularly clean the fan with a soft cloth, avoid shaking and bending the fan blades when cleaning, do not use solvents like gasoline or oil to clean the fan.
*** See more other products:
How to Install Ceiling Light Mounting Bracket
Although models vary, nearly all have some assembly required before the recessed fan can be hung. The fan in the example should have a down bar and three separate trim pieces pre-assembled. The ceiling light fan wires must be routed through all of these in order to exit the down bar at the top. A special bracket is attached to the bare box and the wires are again routed to where they are accessible.
Nearly all recessed ceiling fans with a down bar are simply placed in the box frame. There is a large ball at the top end of the down bar with a notch on one side; It is located in the bracket with the groove fitted on a protruding part in the bracket.
If the notch is not installed properly, it will allow the down bar to rotate in the holder, causing excessive vibrations and potentially damaging the wiring; Make sure (#1). the location is in place.
The exhaust mounted ceiling light fan typically has a hook where the fan motor can be temporarily suspended during the electrical connection, with the final installation of the motor to the ceiling box being made after those connections are made. be done.
#2. Distance Between Floor and Ceiling With Ceiling Propeller
Otherwise, a helper will be needed to keep the fan motor in place while the electrical work is done.
Connect wires from fans to those in (#3). the electrical box; white wire to white wire and blue wire to bare wire or blue wire in the box. Recessed ceiling fans will usually have both black and blue wires attached; Black wire goes to the black wire inbox while blue wire goes to the same black wire inbox or to another wire in the box that has been switched by a wall switch.
The only way to know for sure is to test the color box wire with a voltmeter or a non-contact voltage probe, checking both with on and off switches.
The box wire is not cut off to the fan motor (black) while the fan light wire (green) goes to the box wire to be switched or not deformed. Connect the nuts, ensure that the nuts are tight and the ropes are securely held, and fold the wire into the existing box or cut area to be covered with a rim.
Any upper part is usually installed at this point and the fan is ready for the rotors to be installed.
Conclusion
Above is detailed information on Above are detailed information on how to install recessed ceiling light frames, hopefully, they will help you when needed. And one thing we want to remind you of, please be careful in the assembly process and pay attention to the power source, to avoid harm to the body.